Sensormatic Ultra Post Security Pillar 58Khz

$1,699.00

Sensormatic™ 58kHz Ultra Post Security Pillar – Refurbished

The Sensormatic™ 58kHz Ultra Post Security Pillar is a reliable solution for retail environments with significant metal objects near the entrance. This refurbished system is ideal for locations like gas stations and convenience stores where metal racks, shelves, and door frames can interfere with other security systems. The Ultra Post security system excels in these environments, providing accurate tag detection and effective loss prevention.

Key Features:

  • Master Tower Coverage:
    • Covers a single door when placed on the handle side.
    • Can cover a double door if positioned in the middle of the doorway.
    • For double doors without a center tower, an additional Ultra Post slave tower is required.
  • Enhanced Metal Compatibility: Works well around metal objects, making it suitable for locations where traditional checkpoint systems struggle.
  • Small Disposable Labels: Labels measure 1 1/2″ x 1/4″, making them discreet yet effective.
  • High Accuracy: The system offers a higher pick rate, providing more accurate tag detection compared to checkpoint towers.

Advantages:

  1. Works efficiently around metal, allowing installation near metal door frames and structures.
  2. Smaller, less noticeable disposable labels.
  3. Higher accuracy in tag detection compared to other systems.

Disadvantages:

  1. Must be installed by a professional technician, with costs ranging from $900-$1500 depending on the location and number of towers (contact for estimates).
  2. Raised disposable labels may be more noticeable to shoplifters.
  3. Higher initial equipment cost.
  4. Maintenance costs are typically higher after installation.

Installation Requirements:

  • Requires a dedicated electrical outlet on its own breaker to minimize electrical noise.
  • Needs proper grounding and neutral wires. Our technical team can coordinate with your electrician to ensure correct setup.

Ideal Applications:
The Ultra Post Security Pillar is a great solution for stores that cannot use checkpoint-style security systems due to environmental factors like excessive metal. Let SensorTags Inc. schedule your installation today to ensure your store is protected with the most suitable security system.

Contact us today to schedule installation and protect your store with the Sensormatic™ Ultra Post Security Pillar!

SKU: ST58004. Category: .

Product Description

Sensormatic™ 58khz ultra post security pillar

The refurbished 58khz Sensormatic ultra post security pillar is used in locations that have an excess of metal objects in the front of the store.  One master tower will cover a single door placed on the handle side of the doorway.  One master tower will cover a double door if placed in the middle of the double door.  If you wish to cover a double doorway without a tower in the middle you must also get the ultrapost slave tower.  This technology is a good alternative when checkpoint frequency systems are not a good fit for a smaller store.  A good example of where these towers are used is gas stations and convenience stores.  There is a lot of metal in the fronts of these stores including the racks and shelves.

Advantages to an ultra post security system:

1. Works well around metal in environment so can be installed close to meal door frames.

2. Disposable labels are much smaller ( 1 1/2″ x 1/4″)

3. Pick rate is a bit higher so it will ring a tag a bit more accurately than a checkpoint tower.

Disadvantages of the Ultra Post Security Pillar:

1. Must be installed by a technician ($900-$1500 or more additional cost depending on location and number of towers, call for estimate)

2. Disposable labels are raised up so a bit more noticeable by shoplifter.

3. Original cost of equipment more expensive.

4. Maintenance after install more expensive.

The ultra post security pillar is a good solution for stores who can not use the checkpoint type security due to environmental factors. This tower requires dedicated electrical outlet(s) that are on their own breaker.  It is sensitive to electrical noise and your electrician can give you dedicated ground and neutral wires.  Let our techs help you communicate with your electrician so you get the correct hookup for these towers.  Let SensorTags Inc schedule your install today.

 

Additional information

Weight 45 lbs
Dimensions 20 × 76 × 67 in

Related Products